Zacznę od tego, że prześledziłem dokładnie forum i czytałem wątki o tych programach.
Zaparłem się, że uruchomię mojego C-770 UltraZoom, już 3 dni walczę i wymieniam mejle z facetem z Pine Tree Computing (Michael A. Cochran) i jestem już![]()
Prześledziłem dokładnie instrukcje (należy wybrać wariant dla C-750 i ma działać dla C-770) czytałem wielokrotnie mejle od Michaela i nic.![]()
Gość napisał mi krok po kroku jak to zrobić i to Wam poniżej zacytuję
> 1) Run camera controller
> 2) click past any errors to get to the main menu.
> 3) select Snapins/Find Olympuys strings from the menu.
> 4) select your camera in the list.
> 5) click the add button.
> 6) click the ok button and exit from camera controller.
> 7) disconnect camera from usb
>make sure camera is in PC control mode.
> 9) connect camera to PC
> 10) open windows explorer
> 11) try to access camera drive in windows explorer. You should get a "no disk in drive" or "drive not ready" error. If you do not get an error, the camera is not in pc control mode.
> 12) once you have determined the camera is in pc control mode (you get an error in step 11), close windows explorer
> 13) restart camera controller
> 14) If prompted, select the C750 model camera.
> 15) Camera Controller should find the camera.
If you follow the above procedure and camera controller still doesn't find
your camera, reset your camera to factory default using the camera reset menu on the same hidden menu as pc control mode. You can also reset the camera by removing the batteries and any power adapter overnight. After the reset, put the camera back in pc control mode and try camera controller again.
Uściskam mocno dłoń temu/tej komu się to uda![]()
Ja próbowałem i nie ma szans mimo zapewnień Michaela
Gdyby komuś się czasem udało to zrobić na WinXP to NAPISZCIE KROK PO KROKU JAK TO ZROBILIŚCIE. Bo może ja coś źle robię![]()
Ja się rozkładam na punkcie 11. Nie ma szans uzyskać takich komunikatów, bo jesli nie ma karty to nie wejdzie się w PC CONTROL MODE, a jak karta jest w aparacie to od razu widać go jako dysk wymienny.
Zdecydowanie coś jest skopane w tym programie
Chyba zostało tylko kombinowanie z tym MENU i VIEW oraz napisanie własnego skryptu na bazie tego z ich strony...
Kombinuję dalej