Troche informacji z pozdrowieniami dla Darka.
Jednak nie trzeba na sile laczyc faktu ze 2x wiecej pikseli oznacza 2x gorzej:
* Reducing the micro lens gap to capture all the light hitting the sensor. This has been highlighted in the 40D, 1D III and 1Ds III sensors and the new 50D sensor now achieves effective 100% coverage. Only very minor improvements are expected from this point on (e.g. shaping the lenses towards the corners of the frame to capture angled light.
Czyli to co podalem wczesniej. W tym temacie jednak teraz doszli do sciany, sensor zbiera prawie 100% swiatla ktore dociera
* Reducing the noise level of each pixel. Canon have made changes over several generations of sensors to achieve this, bringing the amplifiers closer to each pixel, changing micro-circuit configuration and lowering voltages so the sensor runs colder. Again the design of the 50D is a big step forward here from the 40D and 1D III etc. Canon have one more big jump lined up, with low voltage cold running CMOS designs to gain at least an additional stop in lower noise at higher ISOs or long exposures.
Na poziomie elektroniki jeszcze mozna jak widac powalczyc
* Pixel binning for high ISOs. A new technology enabled by the complexity and processing power of DIGIC IV where they can bin 2, 4 or 8 pixels together at the raw level and average out the noise between them. This is seen by Canon as a key technology in balancing very high resolution sensors (in the 50mp range) with low noise at very high ISOs. Right now they are not pushing this too much with the 50D so as to not create confusion in the market (they see more potential for the technology as sensors get larger and in the pro-market).
Czyli jak pogodzic tych co chca 3mpix malo szumnych albo 20 do landszaftow
* Increased image resolution – This is a newer strategy (most evident on the 450D where they have changed the anti-aliasing filter (thinner and closer etc) so as to achieve a crisper image per pixel without loosing the benefits of anti-aliasing filter on diagonal edges etc.. The 50D has the same technology. One further option for the future is for Canon to drop the anti aliasing physical filter and do it in a future DIGIC generation where there can be smarter allocation of colour values than the blurring achieved by a light based filter.
Jak widac nie szkla byly przeszkoda, a zabezpieczenie w postaci AA.
* Increased raw bit depth for improved dynamic range. Here Canon have made the jump to 14 bit and will move to 16 bit in their future sensor technology generations. Canon see the main usage of extra bit depth as providing the dynamic range to translate the sensor image into a printable or viewable image with a higher dynamic range. In other words mapping the 14 or 16 bits into an 8 bit viewable or printable image that mimics the dynamic range in the scene.
Czyli nie zapominaja o DR
Odpowiedz z cytatem
| OlyJedi
Zamieszczone przez Darekw1967
.
